PA-W801B
200mm powered oversized, down-firing, subwoofer in ported enclosure with high efficiency D-Class amplifier
Ključne značajke
400W Max Power Class-D Amplifier |
Down Firing Ported Enclosure |
Compact design, Can be installed under the seat |
Woofer Cone with Reinforcing Ridges & Dual Area cap |
High Durability, Stress Controlled, Spider |
Optimized Magnetic Circuit |
Air Cooling System |
Side panel with Detachable Power Connector |
Wired remote (Level/Freq./phase control) |
Značajke zvučnika
Sustav zvučnika | Aktivni subwoofer sustav |
Najveća ulazna snaga | 400W |
Veličina zvučnika | 200mm |
Prevelike dimenzije | Da |
Dizajn zvučnika | P.P. cone with Reinforcing Ridges |
Vrsta magneta | Ferit |
Dalijnsko upravljanje | Da |
Ukjlučeno pojačalo | Ugrađeno |
Vrsta zaštite | Ported Enclosure |
Dizmenzije zaštite (BxVxD) | 450 x 300 x 150 mm |
Težina zaštite | 8,4 kg |
Značajke pojačala
Pojačalo D klase | Da |
Maksimalna izlazna snaga | 400W |
Nazivna izlazna snaga (4Ω) | 200W x 1 (4Ω) |
Nisko propusni filter | Da |
Krug za pojačavanje basova | Da, 0 / -12 dB |
Inverter faze 0 ° (Normalno) / 180 ° (unazad) | Da |
Indikator napona | Yes |
Osjetljivost signala Uključivanje | Da |
Ulaz | RCA |
Podesiva ulazna razina zvučnika | Da |
Šasija | Aluminum Die-cast |
Da | |
Isporučuje se s DC kabelom | Yes |
Pojedinosti pojačala
Maksimalna izlazna snaga (4Ω) | 400W x 1 |
Nisko propusni filter | 50~150 Hz (-18dB) |
Krug za pojačavanje basova | 0~12dB/oct |
RCA ulazna osjetljivost | 0,2 ~ 5V |
Osjetljivost ulazne razine zvučnika | 4 ~ 12V |
Ulazna impedancija | 22kΩ |
Odgovor frekvencije (+0dB, -3dB) | 35Hz ~ 250Hz |
Radni napon | 14,4V (11V ~ 16V dopustivo) |
Maksimalna potrošnja struje | 25A |
Dodatna oprema
Držač | L-shaped 2 pieces |
Daljinska kontrola | wired remote |
Remote control wire | Da, 6m |
DC kabel | 500 cm |
Vijci (Parker-tip) | Ø 5 x 25mm, 16 dijelova |
Vijci (M-tip) | M4 x 6mm, 4 komada |
Perač | Ø 6, 1 komada |
Matica za učvršćenje | φ 6, 1 komada |
-
-
X-Motif Cap & Diamon array cone
-
The X-motif cap, made of Injection-Molded Polipropylene, controls resonance frequency and cut away unnecessary high frequency sound to deliver powerfull, solid bass. Diamond shapes are etched all the way to the speaker edge, helping to reduce surface waves on the speaker diaphragm, decrease vibration, and suppress distortion. The diamond array pattern also provides additional rigidity to the speaker to improve voice coil response for dynamic and clean audio reproduction.
-
-
-
Heat-Resistant Aluminum Voice Coil Bobbin.
-
Most common subwoofer failure factor is Voice Coil Burnout. By using heat-resistant aluminum voice-coil bobbin with higher thermal conductivity, heat is easily transferred to the iron parts. This will Increase durability of the voice coil.
-
-
-
Newly-Designed Airflow Control
-
The air is pushed by the cap, the voice-coil is cooled when air passes through the gap.
-
-
-
Closed Yoke Design
-
The closed yoke realizes larger magnetic circuit to increase heat radiation, the more metal the better the heat radiation.
-
-
-
Computer-Optimized Spider
-
Redesigned shape to equalize the stress to increase mechanical durability.
-